produk
XDB102-3 Sénsor Tekanan Silicon Diffused
Fitur
● CE conformity.
● Rentang: -100kPa…0kPa~20kPa…3.5MPa.
● chip diimpor, motong laser.
● Nyadiakeun OEM, kustomisasi fléksibel.
● φ19mm×5.55mm.
Aplikasi has
● kontrol prosés Industrial.
● Gas, cair jeung deteksi tekanan uap.
● Pangukuran tingkat.
Parameter Téknis
| Kaayaan struktur | ||||
| Bahan diafragma | SS 316L | Bahan perumahan | SS 316L | |
| Kawat pin | Karaf karaf berlapis emas/100mm kawat karet silikon | Tabung tekanan deui | SS 316L (gauge sareng tekanan négatip wungkul) | |
| Cingcin segel | karét nitrile | |||
| Kaayaan listrik | ||||
| Sasayogian tanaga | ≤2,0 mA DC | Input impedansi | 2,5kΩ ~ 5 kΩ | |
| Kaluaran impedansi | 2,5kΩ ~ 5 kΩ | Tanggapan | (10%～90%) :<1ms | |
| lalawanan insulasi | 100MΩ, 100V DC | Leuwih tekanan | 2 kali FS, (0C/0B/0A/02 5kali FS) | |
| Kaayaan lingkungan | ||||
| Larapna média | Cairan anu henteu korosif kana stainless steel sareng karét nitrile | Reuwas | Taya parobahan dina 10gRMS, (20～2000)Hz | |
| Dampak | 100g, 11ms | Posisi | Nyimpang 90 ° ti sagala arah, enol robah ≤ ± 0,05% FS | |
| kaayaan dasar | ||||
| Suhu lingkungan | (25±1) ℃ | Kalembaban | (50%±10%)RH | |
| Tekanan atmosfir | (86~106) kPa | Sasayogian tanaga | (1,5 ± 0,0015) mA DC | |
| Sadaya tés saluyu sareng standar nasional anu relevan, kalebet GB / T2423-2008, GB / T8170-2008, GJB150.17A-2009, sareng sajabana, sareng ogé saluyu sareng "Pressure Sensor Enterprise Standards" tina eusi anu relevan. | ||||
Catetan pesenan
1. Pikeun ngahindarkeun instability sensor, mangga nengetan ukuran instalasi tur prosés instalasi ulah mencét hareup sensor dina 3 detik ulah mindahkeun panas kana sensor.
2. Lamun maké pin cotter emas-plated on kawat a, mangga nganggo beusi soldering handap 25W handapeun soldering suhu low.
Émbaran pesenan
| XDB102-3 |
| |||||
|
| Kode rentang | Rentang pangukuran | Jenis tekanan | Kode rentang | Rentang pangukuran | Jenis tekanan |
| 0B | 0~20kPa | G | 08 | 0~350kPa | G / A | |
| 0A | 0~35kPa | G | 09 | 0~700kPa | G / A | |
| 02 | 0~70kPa | G | 10 | 0~1MPa | G / A | |
| 03 | 0~100kPa | G / A | 12 | 0~2MPa | G / A | |
| 07 | 0~200kPa | G / A | 13 | 0 ~ 3.5MPa | G / A | |
|
| Kodeu | Jenis tekanan | ||||
| G | Gauge tekanan | |||||
| A | Tekanan mutlak | |||||
|
| Kodeu | Sambungan listrik | ||||
| 1 | Pin kovar emas-plated | |||||
| 2 | 100mm Silicone ngawujud karét | |||||
|
| Kodeu | Pangukuran husus | ||||
| Y | Jinis tekanan gauge tiasa dianggo pikeun ngukur tekanan négatip① | |||||
| XDB102-3 -0B-G-1-Y sakabeh spésifikasi② | ||||||
catetan pesenan
1. Pikeun ngahindarkeun instability sensor, mangga nengetan ukuran instalasi tur prosés instalasi ulah mencét hareup sensor dina 3 detik ulah mindahkeun panas kana sensor.
2. Lamun maké pin cotter emas-plated on kawat a, mangga nganggo beusi soldering handap 25W handapeun soldering suhu low.
